View STL7LN80K5_8335072.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

january 2016 docid028831 rev 2 1 / 16 this is information on a product in full production. www.st.com STL7LN80K5 n - channel 800 v, 0.95 typ., 5 a mdmesh? k5 power mosfet in a powerflat? 5x6 vhv package datasheet - production data figure 1 : internal schematic diagram features order code v ds r ds(on) max. i d STL7LN80K5 800 v 1.15 5 a ? industrys lowest r ds(on) x area ? industrys best figure of merit (fom) ? ultra - low gate charge ? 100% avalanche tested ? zener - protected applications ? switching applications description this very high voltage n - channel power mosfet is designed using mdmesh? k5 technology based on an innovative proprietary vertical structure. the result is a dramatic reduction in on - resistance and ultra - low gate charge for applications requiring superior p ower density and high efficiency. table 1: device summary order code marking package packing STL7LN80K5 7ln80k5 powerflat? 5x6 vhv tape and reel 5 6 7 8 1 2 3 4 t op v iew d(5, 6, 7, 8) g(4) s(1, 2, 3) 1 2 3 4 p o werfl a t? 5 x 6 vhv
contents STL7LN80K5 2 / 16 docid028831 rev 2 contents 1 electrical ratings ................................ ................................ ............. 3 2 electrical characteristics ................................ ................................ 4 2.1 electrical characteristics (curves) ................................ ...................... 6 3 test circuits ................................ ................................ ..................... 8 4 package information ................................ ................................ ....... 9 4.1 powerflat? 5x6 vhv package information ................................ . 10 4.2 powerfl at? 5x6 packing information ................................ ........... 13 5 revision history ................................ ................................ ............ 15
STL7LN80K5 electrical ratings docid028831 rev 2 3 / 16 1 electrical ratings table 2: absolute maximum ratings symbol parameter value unit v gs gate - source voltage 30 v i d (1) drain current (continuous) at t c = 25 c 5 a i d (1) drain current (continuous) at t c = 100 c 3.4 a i d (2) drain current (pulsed) 20 a p tot total dissipation at t c = 25 c 42 w dv/dt (3) peak diode recovery voltage slope 4.5 v/ns dv/dt (4) mosfet dv/dt ruggedness 50 t stg storage temperature range - 55 to 150 c t j operating junction temperature range notes: (1) limited by maximum junction temperature. (2) pulse width limited by safe operating area (3) i sd 5 a, di/dt 100 a/s; v ds peak < v (br)dss, v dd = 640 v (4) v ds 640 v table 3: thermal data symbol parameter value unit r thj - case thermal resistance junction - case 3 c/w r thj - pcb (1) thermal resistance junction - pcb 59 c/w notes: (1) when mounted on 1inch2 fr - 4 board, 2 oz cu. table 4: avalanche characteristics symbol parameter value unit i ar avalanche current, repetitive or not repetitive (pulse width limited by t jmax ) 1.5 a e as single pulse avalanche energy (starting tj = 25 c, i d = i ar , v dd = 50 v) 200 mj
electrical characteristics STL7LN80K5 4 / 16 docid028831 rev 2 2 electrical characteristics t c = 25 c unless otherwise specified table 5: on/off states symbol parameter test conditions min. typ. max. unit v (br)dss drain - source breakdown voltage v gs = 0 v, i d = 1 ma 800 v i dss zero gate voltage drain current v gs = 0 v, v ds = 800 v 1 a v gs = 0 v, v ds = 800 v, t c = 125 c 50 a i gss gate - body leakage current v ds = 0 v, v gs = 20 v 10 a v gs(th) gate threshold voltage v ds = v gs , i d =100 a 3 4 5 v r ds(on) static drain - source on - resistance v gs = 10 v, i d = 2.5 a 0.95 1.15 table 6: dynamic symbol parameter test conditions min. typ. max. unit c iss input capacitance v ds = 100 v, f = 1 mhz, v gs = 0 v - 270 - pf c oss output capacitance - 22 - pf c rss reverse transfer capacitance - 0.5 - pf c o(er) (1) equivalent capacitance energy related v ds = 0 to 640 v, v gs = 0 v - 17 - nc c o(tr) (2) equivalent capacitance time related - 48 - nc r g intrinsic gate resistance f = 1 mhz, i d =0 a - 7.5 - q g total gate charge v dd = 640 v, i d = 5 a, v gs = 10 v (see figure 15: "test circuit for gate charge behavior" ) - 12 - nc q gs gate - source charge - 2.6 - nc q gd gate - drain charge - 8.6 - nc notes: (1) energy related is defined as a constant equivalent capacitance giving the same stored energy as c oss when v ds increases from 0 to 80% v dss (2) time related is defined as a constant equivalent capacitance giving the same stored energy as c oss when v ds increases from 0 to 80% v dss table 7: switching times symbol parameter test conditions min. typ. max. unit t d(on) turn - on delay time v dd = 400 v, i d = 2.5 a r g = 4.7 , v gs = 10 v (see figure 14: "test circuit for resistive load switching times" and figure 19: "switching time waveform" ) - 9.3 - ns t r rise time - 6.7 - ns t d(off) turn - off - delay time - 23.6 - ns t f fall time - 17.4 - ns
STL7LN80K5 electrical characteristics docid028831 rev 2 5 / 16 table 8: source drain diode symbol parameter test conditions min. typ. max. unit i sd source - drain current - 5 a i sdm (1) source - drain current (pulsed) - 20 a v sd (2) forward on voltage i sd = 5 a, v gs = 0 v - 1.6 v t rr reverse recovery time i sd = 5 a, di/dt = 100 a/s, v dd = 60 v (see figure 16: "test circuit for inductive load switching and diode recovery times" ) - 276 ns q rr reverse recovery charge - 2.13 c i rrm reverse recovery current - 15.4 a t rr reverse recovery time i sd = 5 a, di/dt = 100 a/s, v dd = 60 v, t j = 150 c (see figure 16: "test circuit for inductive load switching and diode recovery times" ) - 402 ns q rr reverse recovery charge - 2.79 c i rrm reverse recovery current - 13.9 a notes: (1) pulse width is limited by safe operating area (2) pulsed: pulse duration = 300 s, duty cycle 1.5% table 9: gate - source zener diode symbol parameter test conditions min. typ. max. unit v (br)gso gate - source breakdown voltage i gs = 1 ma, i d = 0 a 30 - v the built - in back - to - back zener diodes are specifically designed to enhance the esd performance of the device. the zener voltage facilitates efficient and cost - effective device integrity protection,thus eliminating the need for additional external componentry.
electrical characteristics STL7LN80K5 6 / 16 docid028831 rev 2 2.2 electrical characteristics (curves) figure 2 : safe operating area figure 3 : thermal impedance figure 4 : output characteristics figure 5 : transfer characteristics figure 6 : gate charge vs gate - source voltage figure 7 : static drain - source on - resistance
STL7LN80K5 electrical characteristics docid028831 rev 2 7 / 16 figure 8 : capacitance variations figure 9 : normalized gate threshold voltage vs temperature figure 10 : normalized v (br)dss vs temperature figure 11 : normalized on - resistance vs temperature figure 12 : source - drain diode forward characteristics figure 13 : maximum avalanche energy vs starting t j
test circuits STL7LN80K5 8 / 16 docid028831 rev 2 3 test circuits figure 14 : test circuit for resistive load switching times figure 15 : test circuit for gate charge behavior figure 16 : test circuit for inductive load switching and diode recovery times figure 17 : unclamped inductive load test circuit figure 18 : unclamped inductive waveform figure 19 : switching time waveform
STL7LN80K5 package information docid028831 rev 2 9 / 16 4 package information in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark.
package information STL7LN80K5 10 / 16 docid028831 rev 2 4.1 powerflat? 5x6 vhv package information figure 20 : powerflat? 5x6 vhv package outline bottom view side view t op view 1 2 3 4 pin 1 identification 8 7 6 5 8 7 6 5 1 2 3 4 pin 1 identification
STL7LN80K5 package information docid028831 rev 2 11 / 16 table 10: powerflat? 5x6 vhv package mechanical data dim. mm min. typ. max. a 0.80 1.00 a1 0.02 0.05 a2 0.25 b 0.30 0.50 d 5.00 5.20 5.40 e 5.95 6.15 6.35 d2 4.30 4.40 4.50 e2 2.40 2.50 2.60 e 1.27 l 0.50 0.55 0.60 k 2.60 2.70 2.80
package information STL7LN80K5 12 / 16 docid028831 rev 2 figure 21 : powerflat? 5x6 vhv recommended footprint (dimensions are in mm)
STL7LN80K5 package information docid028831 rev 2 13 / 16 4.2 powerflat? 5x6 packing information figure 22 : powerflat? 5x6 tape (dimensions ar e in mm) figure 23 : powerflat? 5x6 package orientation in carrier tape
package i nformation STL7LN80K5 14 / 16 docid028831 rev 2 figure 24 : powerflat? 5x6 reel
STL7LN80K5 revision history docid028831 rev 2 15 / 16 5 revision history table 11: document revision history date revision changes 07 - jan - 2016 1 first release. 26 - jan - 2016 2 modified: table 2: "absolute maximum ratings" minor text changes
STL7LN80K5 16 / 16 do cid028831 rev 2 important notice C please read carefully stmicroelectronics nv and its subsidiaries (st) reserve the right to make changes, corrections, enhancements, modifications , and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant information on st products before placing orders. st products are sold pursuant to sts terms and conditions of sale in place at the time of or der acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and s t assumes no liability for application assistance or the design of purchasers products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from the information se t forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2016 stmicroelectronics C all rights reserved

▲Up To Search▲

Price & Availability of STL7LN80K5

	To Download STL7LN80K5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .